Dynaplug's® Tire Repair Plugs are constructed from viscoelastic rubber impregnated cord; the tip is made of non-abrasive brass. When a tubeless tire suffers a puncture, remove the offending object and insert the plug directly into the puncture. 5 plugs included in one pack.
Only for use with Dynaplug Air, Racer, Racer Pro, Dynaplugger, Micro Pro/Pill, and Covert tools.
B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
Soft Pointed Nose Tip - 5 Pack | Mfg PartNum: DPB-1472 |
Category: Tire Repair | |
Sharp Pointed Nose Tip - 5 Pack | Mfg PartNum: DPB-1670 |
Category: Tire Repair |
Sometimes sealant alone won't stop a puncture leak. These Dynaplug repair plugs (usually one, occasionally two) have quickly stopped all leaks so far and allowed me and friends to continue riding. I can't imagine going back to inner tubes.
The plugs are incredibly easy to use, even on the side of the road, and they seal punctures quickly and effectively. I've used them multiple times now, and each time they've worked flawlessly, allowing me to get back on the road in no time. The compact design means they take up almost no space in my kit, and the peace of mind they provide is priceless.
Dynaplug is the way to go. I no longer feel the need to carry a spare tube, and that's a testament to how much I trust these plugs. Highly recommended!
As a late adopter of tubeless riding, I have to say I'm now a convert. These work and are so much simpler than changing a tube, or worse, having to patch one on a ride. I still carry a spare tube as a backup for the worst case scenario. One thing that people don't mention is that you will get more punctures riding tubeless. A sharp object only needs to puncture the tire when tubeless, instead of both the tire and the tube with a traditional setup. You'll notice it when you see a wet spot from the sealant seeping out until it seals and at first this is unsettling. If I notice a spot after a ride I'll rotate the tire so that the spot is at the bottom to allow the sealant to pool over the spot. The next day if the tire is low/flat or still seeping sealant I'll use a Dynaplug.
In my tubeless life I've had one flat that required a call-of-shame to my wife to pick me up. After that I started carrying a spare tube, which I have not needed and never looked forward to using because of sealant mess.
My friend sold his bike and gave me his Dynaplug repair kit with only one plug left. I ordered these repair plugs just to be ready for a puncture that is too big for the sealant and not big enough to require the tube (or the call to the wife).
Thankfully I have not needed them but it is good to know they are there.
My friend had success when he used the original plugs that came with the repair kit so I assume these will also work fine, And to clarify the headline, I DO know how they work. I just don't know IF they work. And I hope to never know. But I'm ready . . . just in case.
Fortunately, I've only had to use one plug (pointed). Received a 4mm cut 1/3 distance between center tread and rim on a Schwalbe Pro One 700x25 mounted on a Dura Ace rim. Sealant wouldn't hold over 2.5 bars. Installed plug and it sealed instantly. Didn't have a blade to trim excess fibers so I just left them. Completed 60 mile ride without any loss of air. Trimmed fibers that evening. Plug lasted another 1000+ miles before it just stopped sealing, even with Stan's Race Sealant. Bought a refill pack of pointed plugs to make sure I wouldn't run short.
I always have a variety of Dynaplugs available in my seat bag. They are very useful for temporary patching punctures in tubeless tires that are too big for the sealant in the tire to handle. I am a ride leader on club rides and use them for my own tire and for others on the ride that need them.
Used the kit for the first time on the side of the road so I was not sure how successful the repair would work out, but it worked far easier than expected. Added some Co2 and finished a 40 mile ride with no sealant leakage. Can't say enough about the ease of use.... works as advertised
This past August I had 3 potential flats that sealed up on my rear tire, but required a plug when I got home. The Dynaplug plugs are easy to install and work perfectly. I highly recommend their use.
These things are wonderful. I rolled over a shard of glass and cut a hole in my rear tire 7 or 8 mm long. I tried the bullet tip plug, but couldn't force it in the hole. But 2 of the pointed tip size next to each other sealed it in a hurry. After filling it with an CO2 inflator it held air for several days until I replaced the tire. I'll never ride without the handle and some plugs.
I only wish the larger plugs came with a pointed tip.