Description
BBT-10.2 Hollowtech II Adjusting Cap Tool
The Park Tool BBT-10.2 Hollowtech II Adjusting Cap Tool removes and installs crank caps on Shimano® Hollowtech II® cranks. This tool has a built-in hook to lift the safety plate and speed up crank removal. It's steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
Features:
Removes and installs 8-point adjusting caps on Shimano Hollowtech II crank/bottom bracket systems
Built in hook to lift safety plate on left side Shimano Hollowtech II crank arms
Steel investment cast body
Optional use with 8mm hex wrench for seized caps
Removes and installs self-extracting one-key release caps on Sram and Race Face cranks with 16mm hex hole
Investment cast steel construction with 8mm hex key for better leverageB-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
Reviews
Ordered by Most Relevant First
5 stars
4 stars
3 stars
2 stars
1 stars
Simple and very effective
1 of 1 customers found this review helpful.
An absolute must have tool for Shimano (DA, Ultegra, etc.) crank users. If you have ever had an extremely difficult time trying to remove the crank bolt on the non-drive side crank arm, then look no further. This tool allows for easy installation and removal of the crank bolt. This can also be used with an Allen key (for extra leverage) for those times when the bolt feels like it has seized. Quality tool made of metal, so it won't strip like some of the existing plastic tools out there. Simple, effective and inexpensive.
Reviewed 1/23/2017
Was this review useful to you?
Yes/
NoThank you for your feedback.
A Must Have in Toolkit
by MikeMo
Cycling Enthusiast
East Tennessee
Great tool. Makes removing and installing crank arms a snap!
Reviewed 6/27/2020
Was this review useful to you?
Yes/
NoThank you for your feedback.
Does the trick.
by Cat 4 Wannabe
Cycling Enthusiast
Boston
1 of 1 customers found this review helpful.
I needed to remove my crank to install a power meter. I was surprised at how easy it is with the new bottom brackets. This tool did the trick for my Shimano Ultegra cranks. The wide wing nut design makes it easy to tighten... maybe a little too easy as the cap is supposed to be snug and not cranked down... so watch out for that!
Reviewed 4/18/2019
Was this review useful to you?
Yes/
NoThank you for your feedback.
Easy cap removal.
1 of 1 customers found this review helpful.
This makes removing caps on shimano cranks a breeze. This is way easier than using a butter knife wrapped in masking tape like I use to use.
Reviewed 3/21/2019
Was this review useful to you?
Yes/
NoThank you for your feedback.
Best tool to removeinstall Shimano crank cap
1 of 1 customers found this review helpful.
Simple, with excellent leverage to remove or install Shimano crank arm cap.
Reviewed 7/26/2018
Was this review useful to you?
Yes/
NoThank you for your feedback.
tool that works
by scappoose cowboy
Cycling Enthusiast
hills above Scappoose
This is one of those tools that just work when you need it
Reviewed 4/9/2021
Was this review useful to you?
Yes/
NoThank you for your feedback.
Fast shipping. Product description accurate
Fast shipping. Product description accurate
Reviewed 1/23/2021
Was this review useful to you?
Yes/
NoThank you for your feedback.
This simple tool works perfectly for its intended purpose.
by esnapa
Cycling Enthusiast
Napa, CA
This simple tool works perfectly for its intended purpose. Park Tools always seem to be well made and perform as expected.
Reviewed 12/7/2020
Was this review useful to you?
Yes/
NoThank you for your feedback.
Works like it was designed to work!
by Humanhare
Cycling Enthusiast
Orange County California
1 of 1 customers found this review helpful.
I use this product to remove the plug that holds the crank arms onto the crankshaft. It also has a little lip on the tool to flip up the black link that helps secure the removable crank arm. Pretty nifty little tool.
Reviewed 4/3/2017
Was this review useful to you?
Yes/
NoThank you for your feedback.
You need the adjusting cap tool if you work on your chainring
by Anonymous
Cycling Enthusiast
Denver
Reviewed 10/1/2020
Was this review useful to you?
Yes/
NoThank you for your feedback.
Makes the job easy.
by pedalfaster
Cycling Enthusiast
Kansas
Fits the adjusting cap great, so it makes the job quick.
Reviewed 3/23/2020
Was this review useful to you?
Yes/
NoThank you for your feedback.
