B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
Mfg PartNum: 1-ABSP-CLIK-V104 | |
Black | Category: Tire Repair |
Valve Type: Clik | |
I put this on the end of the hose of my Fanttik S200 APEX portable electric pump I bought at one of the well-known club warehouses. I was concerned about the outside dimension of the hose working with the Lezyne Clik Chuck. So I bought a spare hose on Amazon after reading a review that said it fit the Fanttik pump. I cut the end off the hose, wet it with alcohol, pushed the chuck into it, and screwed on the nut. Voila! It fit like a champ. So now I have a quality Clik chuck instead of the solid plastic Schwalbe adapter on the end of the hose. The bleed valve will allow me to easily depressurize my tubeless tires when I am ready to add sealant or just replace them. The 90-degree head makes it a bit easier to attach to the Clik valves. I highly recommend and may build another set sometime.
This converted my Gravelero pump from Schrader/Presta to Clik. I then used my Speedy Stitcher to close one end of a 6" piece of 1.5" Nylon Protective Hose Sleeve, turned it inside out, and covered the right-angle head on the pump. It stopped rattling and collecting crud. The chuck works great: I recently got a 2" finishing nail through my rear tire and after replacing the tube with a spare I inflated it with my modified pump.
