X
Signin to Your Account
Questions? Call our tri Specialists! 1-800-445-4790
COVID-19 Response
27.2 mm x 330 mm
Click to zoom
27.2 mm x 330 mm
Fizik Cyrano 00 Carbon Seatpost
Fizik Cyrano 00 Carbon Seatpost
Fizik Cyrano 00 Carbon Seatpost

Fizik
Cyrano 00 Carbon Seatpost

Mfg PartNum:
$249.99
In Stock Now
Ships Free!
Earn $19.99 in Podium Club credit. Click to Learn More.
1999
POINTS
This size is not eligible for Podium points
Please Confirm Size
Qualifies for Free Shipping!

With extra comfort comes extra speed. The 25 mm setback head is designed to flex to smooth out the roads while seated. The post is built from high-modulus uni-directional carbon/aluminum ergal. The hardware is titanium to save weight, bringing the post's weight down to 190 grams. Available in 27.2 mm or 31.6 mm sizes.

T25 torx bolts. 27.2 mm diameter. 330 mm length. 190 g.

B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.

 

Seatpost Clamp:  

 

Seatpost Type:  

 

Setback: 25 

27.2 mm x 330 mm

Weight: 175 grams

Mfg PartNum: F1703958 

Seatpost Clamp: 27.2 mm

Seatpost Type: Rigid 

Setback: 25 mm

31.6 mm x 330 mm

Weight: 195 grams

Mfg PartNum: F1703959 

Seatpost Clamp: 31.6 mm

Seatpost Type: Rigid 

Setback: 25 mm

Ordered by Most Relevant First
5 stars
4 stars
3 stars
2 stars
1 stars
(7)
(2)
(0)
(0)
(0)
(78%)
(22%)
(0%)
(0%)
(0%)
A simple, clever design
by Anonymous
Cycling Enthusiast
SE CT
1 of 1 customers found this review helpful.

Lots to like about this seatpost: (1) a simple attractive design which looks as though it should provide good compliance; (2) its saddle clamp accepts 7, 7x9, and 7x10 mm saddle rails without having to buy special parts; (3) the two bolt front/rear clamping system should eliminate the worries about slippage that you get with single bolt designs that rely on friction; (4) it�s reasonably light: the two 31.6 x 330mm ones I have weigh 195 and 197g (minus the neat rubber sealing ring, which adds 7g in case you wondered).

Setting the saddle angle is not as simple as shown in the wordless �pictograph� instructions enclosed. They indicate that one uses the front thumbscrew to set the angle and then locks the saddle in place by torquing the rear screw (both are titanium T25 Torx). If one is using a digital level (naturally the bike must be leveled axle-to-axle first), one quickly sees that tightening the rear screw raises the nose of the saddle by a degree or two. Which might not be visible without a level. The trick is to tighten the rear screw in steps, after each step using a T25 to tighten the front screw to bring the angle back a bit past the target value. Hopefully you will end up with the rear screw arriving at the final torque of 7nM before the front one does.

Take your time, being careful to fully seat the T25 driver into the screw heads before applying force. If you strip one of the heads, you won�t find a replacement at your local hardware store, and Fizik didn�t reply to emails. Using fresh T25 drivers may help: Crescent T25 1/4� drive sockets for your torque wrench cost only $3 on Amazon.

As other reviewers said, before you start it�s wise to disassemble it (one screw at a time, maybe taking photos as you go so as to get the spherical washers and pivots back the right way!) and lightly grease the screw threads and their pivots.

Also worth confirming that the multi-tool you bring along on rides includes a T25 driver!

Reviewed 8/31/2020
Was this review useful to you? Yes/No
Thank you for your feedback.
Takes the edge off
by rotating mass
Competitive Racer
Far NorCal

I bought this post to upgrade the OEM post on the T-Lab X-3 I bought this year.

While it isn't quite as compliant as the Specialized CG-R post I have on my cross bike, it is way lighter, better looking, and does smooth out some of the chatter on gravel.

Reviewed 9/7/2020
Was this review useful to you? Yes/No
Thank you for your feedback.
Incredibly Comfy
by CH
Cycling Enthusiast
Vancouver, WA

I was feeling the road a little more than I wanted to on my new bike, so I decided to take the plunge and try out this seatpost.

SO GLAD I DID! I was shocked how much smoother my bike rode. It minimizes road vibrations without taking any energy away. No bounce or rocking back and forth. Sure you'll still feel pot holes and bumps, but the rest of the road drastically disappears.

Still can't believe it.

On my scale it comes in at 187 grams and that's the 31.6 size.

Looks great in person, and haven't had any slippage.

Reviewed 11/16/2019
Was this review useful to you? Yes/No
Thank you for your feedback.
My favorite seat post Easy to adjust and great compliance.
by JOhn
Cycling Enthusiast
Minnesota

Great seat post - Fizik has simply the best method for adjusting the tilt on a seatpost. You loosen the front bold and then turn the thumbscrew until you have it where you want it then retighten the front bolt.

I had gone away from previous Fizik Cyrano posts when their carbon post didn't have any real compliance. This is a redesigned post with the offset being used as a carbon cantilever arm to provide great compliance.

Pro tip Disassemble this seat post before using and lube with grease the two pivots where the bolts secure into the seatpost to get rid of any creaking.

Reviewed 7/4/2019
Was this review useful to you? Yes/No
Thank you for your feedback.
Love this post.
by CH
Cycling Enthusiast
Vancouver, WA

I bought this post hoping it would smooth out my ride a little bit, and it did just that.

Does the road disappear completely? No, but was it a noticeable difference? Yes! It's very easy to install and adjust and holds my Di2 battery fine. I've not had any noises or slippage and it looks better in person. This post does what it claims to do without feeling any flex or bouncing. I weighed it with my gram scale at 187g for the 31.6 size.

Reviewed 3/22/2020
Was this review useful to you? Yes/No
Thank you for your feedback.
Needs assembly compound to stop squeek
by Anonymous

This is a really nice light weight post, but it took a few days to figure out how to stop the squeeky noise. Initially I thought it was the postframe connection, nothing I did would make it stop...untill I realized it was from the postseat connection. The plates which clamp the seat are aluminum, the post is carbon. When I took the fizik seat clamp appart and applied carbonalloy assembly compound to the joint between carbon post and aluminum plate, problem solved, the squeeky sound ceased.

Reviewed 12/19/2019
Was this review useful to you? Yes/No
Thank you for your feedback.
easily adjustable
by oldbiker
Cycling Enthusiast
Upstate, NY

lightweight, easy to adjust, great for fine tuning.

Reviewed 9/6/2019
Was this review useful to you? Yes/No
Thank you for your feedback.
Great post
by Vito63
Hamilton
1 of 7 customers found this review helpful.

Ticks all the right boxes.... strong, light, and while not cheap.... it is good value...

Reviewed 3/30/2017
Was this review useful to you? Yes/No
Thank you for your feedback.
Easy adjustability and great vertical compliance
by John
Cycling Enthusiast
Minnesota
6 of 6 customers found this review helpful.

I have always favored Cyrano seat posts from Fizik for their adjustment mechanism - it's simply brilliant. A thumbwheel to adjust the tilt and then you tighten down the rear bolt to snug it up. It is far easier to adjust tilt on this post than on almost any other post I have used. That said, prior Fizik carbon and especially their aluminum posts are rigid and lack almost any vertical compliance making them uncomfortable if you have a frame that doesn't not have a lot of vertical compliance.

However, this seat post is amazing. Prior to this, I had been using a Ritchey Flexlogic seat post which was designed with considerable vertical compliance and which effectively took out a lot of harshness of a ride on a rough road. However, that post got it's compliance from, essentially, fore and aft movement which turned the post into an egg shape as it moved and caused it to slip. Very difficult to hold vertical position with that post. Long story short, it was time for a change.

When I saw this post, with the unique cantilevered carbon arm, I gave it a try. This post has just as much, if not more, compliance than the Ritchey (which was very good) and it has that wonderful Cyrano Fizik adjuster! I bought it, put it on and am very pleased. This post gets it's compliance from the flexing of the cantilevered arm (up and down and not fore and aft). Does a great job at taking out the harshness of the ride and is easy to adjust. This just became my new favorite seatpost.

Reviewed 5/30/2018
Was this review useful to you? Yes/No
Thank you for your feedback.