I tried several products. I found Park Tool CL-1 the best for my needs. I lube between once a week to once a month. The dry or wax lubes need too much attention. The thin lubes also need to be applied far to often. This product is an exceptionable maintenance cycle (fuss factor) to make CL-1 my choice.
MY lube cycle, I clean the chain with a rag and an old tooth brush to get all the road dust off the chain. I next apply lube to each chain joint (one dot of oil on each side). Spin the chain around several times to work the oil in and the clean off any lube on the outside of the chain. Don't forget to wear gloves.
I attended a bicycle mechanics course in Oregon, in which I was instructed in the use of many different tools and supplies. I used this chain lubricant prior to my paricipation the Ride the Rockies event in June, 2012. The bicycle was borne on a roof-top carrier for the drive from VT to CO. When I arrived at the start of the ride in Gunnison, CO, I found the bike to be in top condition for the 400 mile () ride, and all went well. Among the many preparative measures I undertook, I consider the chain lubrication to be among the most important, and (in retrospect) one of the most beneficial, attributable to this Park Tool Chain Lubricant.