Travel Compatible Tubeless Treasure.
Lezyne's Pressure Over Drive with a flip thread ABS1 Pro Chuck offers the high volume inflation of an air compressor in a stylish, lightweight floor pump. Equipped with Lezyne's Tubeless Power system, the stainless steel foot-lever releases a continued blast of compressed air that quickly seats tubeless setups in conjunction with an oversized piston, barrel, and hose. The flip-thread ABS1 Pro Chuck features a 90° design that makes it easy to securely engage Presta and Schrader valves. The integrated Presta valve-core wrench facilitates valve core tightening and removal with tubeless systems. The wood handle adds a touch of class while also providing a smooth gripping surface.
B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
Bought this primarily for tubeless set up and it works great! It will only thread onto a valve core, so for tubeless just remove the valve core and hold the head onto the valve stem, flip the switch, and it will seat first try. I did four tubeless tires within 10 minutes without any issues. Because you do need to build pressure in the chamber before using it as a regular pump, I still use a different cheap floor pump for regularly topping tires up. Though it only takes a few extra pumps if you want to use this as a "normal" pump too.
I purchased this pump to seat tubeless tires on my gravel bike. I soon found out that the chuck included with the pump does not thread on to a valve stem with the core removed. My experience has been that when reinstalling a tubeless tire that has already been used for a while, you almost always have to remove the valve core to get enough air flow to seat the bead. Once I got the Lezyne tubeless chuck to use with this pump that process has been easy. But I should not have had to buy the tubeless chuck separately.
Lezyne never disappoints. There is a learning curve as instructions are not the best, but youtube videos help you understand how to set the tubless tire before adding sealant. Tip, remove valve core, of course, from wheel valve, after installing tubeless tire. Then you cannot 'screw' on the head valve, although it seems odd, you simply hold the pump to the open core until the tire 'pops' adubily into place. then, add sealant at a 45 degree angle of the wheel, so that the sealant can flow down the interior of the tire, replace valve core, inflate, and you are done! Super simple. And as a daily pump it is nice and the inflation gauge is at the top, vs at the floor like so many, so easy to read. Great quality product, cannot go wrong if you do not have an air compressor and do not wish to waste CO2 cartridges for setting tubeless tires at home.
Just switched to tubeless tires and this pump makes mounting them easy.
Didn't know I needed another pump, but it was worth it.
Lezyne screw on valve and pressure release are my favorites on tire pumps.
The air chamber helps a lot with getting the bead to set when going tubeless.
I didn't look close enough to see that it is a screw-on valve connection - not my favorite. I prefer a quick-release for day-to-day needs, but the screw-on works fine for when I have to seat a bead.
Bought the Lezyne Pressure Over Drive with ABS1 Pro; analog version. Now I have an easier time seating my tubeless tires onto the rim. Should of bought this in the first place, instead of the Joeblow Sport III, What was I thinking???
